Envirotile Abutment Wall Soaker

Abutment Wall Soaker for use with Envirotile, for installation on warm or cold roofs.

Part of the Envirotile Synthetic Roof Tile system – Envirotile tiles interlock with adjacent and under tiles to form a more secure integrated roof covering, and uses a reduced lap that can require just 12 tiles per square metre; so reduces weight, material cost and work. Reduced weight means cheaper transportation, reduced CO² transport emissions and less structural roof requirement. Being easy to work with and approximately 50% the weight of other synthetic tiles, makes Envirotile the perfect choice for creating an authentic looking conservatory roof conversion.

Install on warm or cold roofs

Compatible with Envirotile roof tiles

Position ENVABTSOA to the abutment wall area, overlap the edge of the fascia by a minimum of 50mm in line with the bottom edge of the 1st course of Envirotile’s

For installation on warm board roofs tack/screw down at 500m intervals along the full length of the abutment

For cold batten/lathe roof installation tack/screw direct to the batten, 25mm from the batten edge, at every batten course

Abutment Wall Soaker for use with Envirotile, for installation on warm or cold roofs.